The pattern calls for toile and I have been saving some scraps of a toile that I used to make my Lazy Punk quilt.
The toile looks like a typical toile until you have an up close look. It is skeletons! I've been saving this scrap waiting for the perfect opportunity to use it and this is just the quilt! But my plan was to transform the fabric to add my personal touch and transform it I did. More to come on the transformation in the coming days.
For now I thought I would do a little mini tutorial about another way to finish the edge of a hexagon quilt. There are so many ways to finish the edge of an English paper pieced hexagon quilt top and today I thought I would share one of the methods that I like to use to create a straight edge.
There are two different edges on a hexagon quilt top. The first is an edge of "Vs".
This one is easy to straighten because you just trim the points with a rotary cutter and ruler and the result will be a nice straight edge. The other important factor is that in trimming this edge you will not be cutting through your stitching so the seams will be intact. I leave the papers in my quilt top until I am ready to trim the points. This prevents stretching.
The other edge looks like dentil molding.
You could simply trim the hexagons 1/4" beyond the mid-point (the red circles) to give you a nice straight edge.
When you open up the seam of the lower hexagon the problem is that the 1/4" seam allowance area is not stitched closed (see inside the red circle). I like my seams stitched right to the end of the seam because I know it will be secure. If it is not stitched to the end my fear is that eventually the seam may open.
A second option is to open the seam allowance at the top of the innermost hexagons (at the red arrows) and then trim the them on the red dashed line. What I don't like about this method is that when you add a border or binding the seam will be 1/4" in from the edge (the black line) and so the outermost hexagon will be less than a half hexagon. This just looks wrong to my eye.
My preferred approach is to add half hexagons to fill the space. Normally I baste my hexagons from the back so that the basting will remain in the quilt however when I make half hexagons to fill the dentil edge I prefer to baste through the paper.
I like to work with a larger seam allowance because it makes the basting process so much easier. I dislike cutting fabric slowly, especially if I need to cut lots of fabric for the path between the hexagon rosettes. I wrote about my rapid fire cutting method here. When making half hexagons I will trim the raw edge after I've basted it to the paper. There is a precise 1/4" seam allowance that will allow all raw edges to line up.
My next step is to clip the basting basting threads at the top edge of the outermost hexagons and trim the outer edge so that there is a precise 1/4" seam allowance.
Once the outermost edge is trimmed I can set in the half hexagons.Notice that I've used some tiny applique pins to hold the papers in position. This is optional but I find that retaining the papers helps maintain nice, crisp edges for sewing.
The finished product is a nice straight edge that makes it easy to add borders or binding.
Until I post again, happy sewing!