Tutorial: embroidering leaf and berry details on your quilts

I love to add embroidery details to my quilts. I little bit of embroidery goes a long way to add pizzazz to a quilt! If you love grandmother's flower hexagon quilts you can embroider little details in the centre hexagon. I like to embroider details in the border and one of my favourites is the leaf.

The photograph shown above is a close-up of my quilt Crosscuts. The stitch I used to make the leaves is a simple buttonhole stitch. To add variety I threaded many needles with two strands of green embroidery floss. Each needle had a different green in it. I would embroider one side of the leaf with one green and the other side with a different green. This added depth and variety to the leaves...just like in the garden. I hate to waste floss so if I could only embroider half of one side of a leaf I would do so and then finish with a second colour. This means that sometimes there can be three or four colours in a leaf. In the picture below you can see several examples of this.

If you don't have a lot of different colours of floss but you want to have colour variations in your leaves why not try out variegated floss. Variegated floss is usually a single colour with various shades from lighter to darker. The colour change is subtle so when you embroider with it the colour change happens gradually.

To make a leaf I start by drawing my stem and leaf on my fabric using a non-permanent marker. In this tutorial I used a Frixion pen. The drawing doesn't have to be perfect....it is just a suggestion and I make adjustments as I go. If you are drawing a leaf for the first time draw the stem and then draw a heart shape so that the stem dissects the leaf. The leaf in this tutorial is about 3/4" in length and when the stem is added the whole unit measures about 1 1/2". To start thread a sharp needle with two strands of floss. Tie a knot at the end and trim the excess thread close to the knot. I stitch the stem with an outline stitch starting at the base and working toward the tip of the leaf.

Once I get to the end of the stem I take my needle through to the back an come up just a couple of threads below the tip of the stem. I make a big loop with the floss. I am right handed so I will work from left to right which means the loop will be to my right. I make this big loop so that the floss does not get in my way. If you are left handed you will start on the opposite side of the leaf and make your floss loop to the left. I take my needle down next to the stem down a little from the tip of the stem and bring it up at the outside edge of the leaf. I want the stitch to be on a bit of an angle rather that coming straight from the stem to the outside edge of the leaf.

I slowly and evenly draw up the floss so that it doesn't tangle and this is what the stitch looks like.

I make another big loop with the thread to the right to get it out of the way and take my needle down near the stem a few threads down from the previous stitch and I bring the needle back up on the outside edge of the leaf down a few threads from the previous stitch.

I repeat this process working down the stem.

About half way down I will need to fan the stitches a little to fill the space. This means that the stitches will be closer together near the stem and a little further apart at the outside edge of the leaf.

I continue stitching in this manner until I get to the base of the leaf. I take my needle down at the base of the stem and bring it back up on the opposite side of the stem.

 

 

I continue stitching in the same manner; loop my floss to the right, take my needle down near the stem and bring it up on the outside edge of the leaf. If I run out of floss I take my needle down at the outside edge and make a neat knot on the back.

 

I bring my needle up from the back at the outside edge (white circle) and loop my floss to the right. I take it down next to the stem (yellow circle) and bring it up at the outside edge of the leaf (green circle). I continue stitching in this manner until I get to the tip of the stem. I take my needle down next to the stem and make a small knot at the back.

And there you have the finished leaf! Notice how the variegated thread shades the leaf.

 

This is a view from the back. I try to keep my work neat on the front and the back. Don't carry your floss from one area to the next; tie off the floss and start again. Be sure to make small knots and clip the excess floss close to the knot. When you tie off at the back be sure to clip the floss close to the knot or better yet run it under the embroidery and then clip it off.

 



You can use the same buttonhole stitch to make berries! The only difference is that you will take your needle down in the centre and bring it up at the outside edge of the berry. Isn't it great how the variegated floss shades the berries in unexpected ways?

So there you have it! I hope you'll try a leaf or a berry or maybe both! You might just need them for my 2014 QAL (quilt along). Speaking of which, I really should come up with a name for the QAL project before I launch. I'll have to give it some thought!

Until I post again, hope you find time to practice your embroidery stitches!

Crosscut - another hexagon variation

This is a quilt that I call Crosscut. It was a Northcott Challenge quilt that I made in 2006. It measures 24" x 27" and it loaded with embroidery, hand piecing and beading!

Crosscut, 2006

It is heavily embroidered with leaves and bugs and flowers! Here are a couple of close-up!

I've got to go out today but tomorrow I'll do a tutorial on how to embroider these leaves. There are very easy, fun and add pizzazz to a quilt! And they might just be another teaser for my 2014 QAL (quilt along)!

Sarah runs a hexie link up party on her blog on the 17th of every month. Be sure to drop by and check out what others are doing. It is a great way to get inspired to create!

Until I post again, happy embroidering!

Owl at Night detail

I am going on a field trip today so it will be a short post (again)!

I had previously shown my quilt Owl at Night. The square blocks in the corners are reverse appliqué. The narrow strips at the top and bottom were stitched into the seam of the centre block and then stitched down by hand. The branch, leaves and owl are all raw edge appliqué.

Owl at Night, 2012

The red maple leaves were cut from this fabric.

The same fabric was used to make this quilt.

It was on my wall and the light was hitting the owl just right so that the owl's eyes almost glowed! Needless to say it didn't photograph as well as it looked in person but here it is anyway!

Once the quilt was finished I used my Sakura Micron Pigma pens to add shading to the feathers around the eyes and in the eyes themselves.

I used Steam-a-Seam II Light to make the owl off the quilt. He was then fused to the quilt top. All of the machine stitching was done after the quilt was layered so the top stitching not only anchors the applique but it is the quilting. I love this little guy...I love birds period and looking at him just makes me want to make some more bird themed wall hangings! If you have any questions about how I made the owl please feel free to ask. I am always more than willing to share my how-tos with you!

The theme for Quilting Gallery's Show and Tell is Leaves, Trees and Flowers so I entered my quilt "A Challenging Year". It depicts the life of a cherry tree through the seasons. This one is entirely hand appliqued and embroidered. And there's some beading too!  I can't wait to see what other people submit. You can vote for five of your favourites here! And while you are there take a look at the Vicki Welsh Hand Dyed Fabrics and leave a comment naming your favourite and you could win fabric! I love the Woodlands Gradient!

A Challenging Year

 

Time to go on my field trip so until I post again, happy sewing!